Highlights of this design

Ultra-low distortion

Purifi drivers are known for record-setting ultra-low distortion. So one should expect clean, clear midrange without a hint of distortion. No matter how complex the muisic, these speakers cleanly deliver it effortlessly.

Easy Load

At 87db (2.83 V/M), the BePure 1 Monitrors are an easy load for just about any amp. 40 tube watts or 100 solid sate watts are plenty sufficient to drive them at relatively high SPL's.

Beryllium Tweeter

The Purifi woofers demand the kind of top end response provided by the Satori beryllium tweeter. Transparent like a ribbon, this dome tweeter offers excellent off-axis response. The beryllium cone is self-damping and has a break-up mode well beyond audibility.

Small Stature...Big Performance

This monitor speaker design rivals or exceeds the performance of a floor-standing speaker in terms of bass extension, frequency response and ultra-low distortion. While small in stature, it produces deep bass that defies expectations, with a foot-print that fits almost any situation.

BePure 1 Monitor

The Story
After our success with the BePure 2's and 3's, it was time to tackle a BePure 1 Monitor.

This design features the same 6.5" woofer as used in the BePure 2's. It is the lowest distortion woofer we have ever worked with. At the same time, it plays quite a bit deeper than one would normally expect from a 6.5" woofer. Combined with the incomparable Satori beryllium tweeter, the BePure 1 Monitor drivers represent a combination that will out-perform almost any speaker not using them. Add a pair of 10" side firing passive radiators that eliminate any possibility of port noise and load the room very evenly with deep bass, and you have an unbeatable combination.

At 87 db sesntitivity at 8 ohms, it is an easy load for practically any amp. And with bass extension down to an F3 of 35.08 Hz, it plays incredibly deep and yet the midrange remains pristine.

If you are looking for an extremely low distortion monitor that reproduces music efforlessly, you just found it!


BePure 1 Monitor


Model BePure 1 Monitor
Design 2-way - passive radiators
Tweeter Satori Beryllium
Woofer Purifi 6.5
Response +/- 3db 36Hz-40kHz
Sensitivity 87 dB (2.83V/M)
Impedance 8 ohms
Amplification 100 watts
Alignment Passive radiators
Dimensions 9 W x 16 D x 20.5 H
Weight 45 pounds
Price$5895 per pair in black satin or white finish

$6295 per pair in a standard veneer **

Custom veneer or automotive finishes quoted on request.
* All dimensions in inches.
** Standard finishes include curly maple, curly cherry, curly walnut, oak and straight mahogany. Wood veneers can also be dyed. So, for example, you can have deep rose-red curly cherry or electric blue curly maple. See gallery for examples.
Explore Finishes

Orders or Questions